cottage design Archives - Arrow Hill Cottage

SIMPLE LIGHT FIXTURES | Minimalist Home Lighting

In today’s post, I share the simple light fixtures we have chosen for our new home. The clean lines and basic color palette of these selections make them the perfect compliments for the minimalist home.

This post contains affiliate links. As an Amazon associate, I earn from qualifying purchases. See my full disclosure here

This has been a very exciting week at Arrow Hill Cottage. The interior framing is just about complete, the house wrap is on, the windows are going in, and the mechanical duct work has started! Now is the time to begin ordering the light fixtures for each room.

Over the past few months, I have been searching various websites and stores for simple light fixtures that would complement the overall feeling we are trying to achieve with our home. Classic, clean, and minimal, with a bit of a vintage industrial vibe.

INTERIOR LIGHT FIXTURES

We will be using quite a few canned light fixtures, especially in the open spaces – such as the dining/ living room and basement family room. However, in many of the other rooms there will be a need for various types of task lighting.

If you are interested in any of the light fixtures we have chosen for our home, be sure to click on the links below each picture!

Flush Mount Ceiling Fixture

This ceiling hugging fixture has sleek lines, and gives off a good amount of light. We will likely install in the downstairs office and possibly in the upstairs mudroom/ back entry space.

Lanros Round Modern Flush Mount Fixture

Semi-Flush Mount

In rooms where we want a bit of an upgraded look, we will be placing these semi-flush mount fixtures. The master bedroom will have one, as will the main floor powder room.

vintage style semi-flush mount

Dining Chandelier

We searched for a special light fixture to be used above our dining room table. This eight light pendant fixture is the perfect fit for what we were looking for. The linear design will mirror the long farmhouse style table we will be building custom, from trees felled on our property.

Savoy House – Burgess – 42″ Eight light pendant

Vanity lighting

In the master, basement and upstairs bathrooms, this simple wall pendant will give just enough character. Using the same light fixtures in multiple rooms will help keep the continuity throughout the house.

Above Vanity Light

We are also considering this fixture in a few locations around the house, perhaps in one of the bathrooms.

Vintage Black Wall Sconce

Accent Pendant

This pendant will be perfect, hanging above our large cast iron sink in the kitchen. In such a clean and minimalist space, this accent will really shine.

Stone & Beam Vintage Ceiling Pendant

Large Room Pendant

With the vaulted ceilings upstairs, we will be using larger pendants. These farmhouse style industrial pendants have long cords, which will bring the light lower into the room – allowing for better coverage.

Three identical pendants will be set upstairs. One for each bedroom, and one for the hallway space.

Millenium Lighting Farmhouse Pendant (17 inch)

Master Bedroom Side Lamps

On either side of our master bed, we will be placing these swing arm lamps. Perfect while reading in bed!

Globe Electric Swing Arm Lamp

Boys Sleeping Nook Lamps

In each of the boys sleeping nooks, they will have small reading lights as well. The multi-directional quality of these trumpet style lamps is really nice.

Trumpet Flare Wall Sconce

Closet lights

In the closets, we will be using smaller wall mounted fixtures. This is a bit of a splurge perhaps, as some of the closets really don’t need any lighting. However, the larger closets in the kid’s rooms will benefit from the extra illumination – especially in the dark storage space behind their hanging rods!

Wall Bar Light

EXTERIOR LIGHT FIXTURES

The light fixtures for the exterior of the house will follow the same style as the interior of the house. There are two different styles we are going to incorporate. Barn lights, which will be placed in feature positions – above the front door and above the garage doors.

Industrial Barn Light

These other simple flood lights will be placed on the side garage doors and near the walkout door.

Black Flood Light

MINIMALIST HOME LIGHT FIXTURES

Feel free to pin these light fixture ideas for reference!

WOOD FRAMING | HOUSE BUILD UPDATE NO. 5

Time for another building update! In this week’s update I share all about the wood framing of our custom home build! Though I was hoping to share the entire framing process, things aren’t moving quite as quickly as we had hoped. This post will discuss the portion of framing that has been completed. And I will be sure to update again once the rest is finished.

At the end of Update No. 4 the foundation had just been completed. Essentially we had a very pretty looking hole in the ground, and were ready to begin the wood framing. I mentioned how excited we were for this step, when the building will start to take shape and begin to actually look like the house we had envisioned!

WOOD FRAMING STEP 1 | FLOOR TRUSSES

The first step in the wood framing process is to attach a wooden sill plate to the foundation. The sill plate is anchored to the concrete with large bolts and creates a base for the floor trusses to be tied to.

Floor trusses work essentially the same way as standard 1x member construction, with a few advantages. They allow for longer clear spans, as well as offering space for mechanical duct-work and plumbing. For these reasons, as well as the ease of installation, trusses are favored over traditional hand framing in residential construction today.

To install the floor trusses for our main level, the framers had to do some fancy footwork. The younger of the two was set with the task of almost ‘tightrope’ walking across the walk-out side wall. With a drop of over eight feet, it was a dangerous mission. He admitted to me later that it was a bit un-nerving! They did eventually get all the trusses in place.

For our family, it was fun to go into the basement and look up at all of the installed trusses since this was the first time that we had a mostly enclosed space to go into. Sensing the personal/ human scale of the project is very important and was something that we hadn’t yet been able to experience, having the spaces open to the great outdoors.

ADDING THE SHEATHING

The next step in the wood framing process was to add the sheathing on top of the installed trusses. Once installed, the sheathing plus trusses work as a monolithic system, providing superior stability.

We were sure to take advantage of walking on our main level for the very first time. In fact, we made an evening excursion of it by picking up food from Dairy Queen and having a picnic on the site of our future dining space. The night was ideal, and the first moments we spent at our house together is a memory I will cherish forever.

WOOD FRAMING THE WALLS

Up next came the main floor wall framing. With the window locations set up, it was exciting for us to finally be able to see what the views from each of the rooms will be.

It came as no big surprise that the most awesome view of all is from the open living/dining space, overlooking the woods and pond. The western facing kitchen window though displays a great sunset view, which we weren’t expecting.

How cute is she, standing in the location of our future front door!

Walking through the shells of each room on the main level, I couldn’t help but imagine all of the memories that are about to be made here. We feel so blessed that we will soon be calling this place home.

Though I have given a bit of a mini walk through over on Instagram, I do plan to also film an entire ‘under construction’ house tour – once the wood framing is complete. Be watching for it!

CONSTRUCTION SITE VISITS

During the wood framing portion of the construction process, my husband and I settled into a nice site visit routine. I will typically stop by in the early afternoon, while out and about with the kiddos running errands. This is a chance for me to touch base with the crew, and answer any questions they may have. Craig will also swing by after he is done with work for the day. Typically the crew has left the site by that time, which allows him to take in the progress a bit more slowly. He generally takes a bunch of photos, then shares them with me.

These site visits help us to take in the day-to-day changes, as well as quickly catch any mistakes in the framing. One day Craig texted me a series of images and I discovered that the back three square windows weren’t centered properly. It’s something I hadn’t noticed earlier in the day, but from his pictures it was very obvious! The middle window should line up with a centered second story window, and it would have looked very goofy if the windows weren’t in alignment.

The center window should be centered on the back wall

And, though we are non-confrontational people, I contacted the framers right away to inform them of the mistake. Thankfully they acknowledged the problem and corrected it right away.

WALL SHEATHING + GARAGE

Next came the exterior wall sheathing. Covering the skeleton of wood studs really made the house shape come to life!

The garage framing was also put into place. During the construction of the garage we did make a couple of minor modifications. We raised the sidewall approximately six inches, which in turn created enough space for eight foot tall overhead garage doors. Previously we had seven foot tall doors, but figured the extra foot will come in handy if we ever decide to get a larger vehicle for our large family.

I am over the moon excited for my husband to finally have a fully functional garage, complete with good lighting, plenty of open floor space, and a proper tool bench. He has waited a very long time for this!

We are also anticipating that we will love having an attached garage during the bitterly cold Minnesota winters! Our oldest daughter, who has mobility issues, will be especially appreciative. The icy winter morning walks to our current detached garage have been full of anxiety and frustration!

The wood framing continued with the setting of the second floor trusses plus sheathing. Because we were so anxious to see the view from upstairs, one night we took a ladder and climbed up. Without any walls for protection, it felt like we were standing on top of a mountain! It was a mighty sight!

Of course, the view won’t be quite as expansive once the walls are up. There are only two windows upstairs. One in the boys bedroom, which faces the street. And one for the girls, with a spectacular view of the woods.

WOOD FRAMING | NEXT STEPS

This week we had a bit of a standstill on the site. The concrete guy was supposed to be back to form up the porch stoop and have it poured – so that the roof trusses for the house and porch could be set at the same time. Unfortunately, the roof trusses were delivered a day too early. This meant that there wasn’t enough space on the site for a concrete mixer truck to come in and pour.

The new game plan is to install the roof trusses for the house and garage first, starting early next week, then come back to finish the porch and get the roof on that portion.

I am beyond giddy for the roof to go up, and to see the house shape in it’s completion! However, that will have to wait for the next update.

Be sure to stick around to see this little house of ours come to life! Thanks for checking in today!

HOUSE BUILD UPDATE NO. 5 VIDEO

PIN THE PROGRESS

Minimalist Cottage | Virtual Tour

Join me today as I give a virtual tour of our minimalist cottage! This is the home we hope to spend the rest of our lives in, and we have worked diligently to design it to meet all of our needs, now and in the future.

With framing in full swing, I thought it might be a good idea to do a quick virtual tour. This could prove helpful for anyone following along with our real life progress updates. I share day to day on Instagram Stories. And also give detailed updates every couple weeks on Youtube. It will be fun to look back and see how close to the original design intent the house ends up.

When this blog was originally started, about two years ago, we were under the impression that the house would be built within the first year. But, as you know, that wasn’t the case. And, though the delays were frustrating, I am able to look back with gratefulness for the extra design time.

DESIGN CHANGES

For reference, THIS is my very first post regarding the design of the house. It was quite a bit larger then. We realized fairly early on that we needed to make major square footage cuts to keep the budget in check.

In fact, it seemed that as time went on we continued to simplify the design MORE and MORE. But with each revision we became increasingly satisfied with the house. There hasn’t been a single change, or simplification, that we have regretted – including THIS surprise last minute revision that created a more open concept main level. Every single change has led us to where we are today.

And where exactly are we? Home. A structure so perfectly suited for our family of seven that I hesitate to call it a house. It genuinely already feels like home, and we can’t wait to move in!

OUR MINIMALIST COTTAGE

The design of Arrow Hill Cottage has forced us to look closely at the way our family lives. And to explore our spacial needs both now and in the future. We realized during this process that, in many ways, we are quite minimal. It is more important for us to have time together within the same spaces, rather than retreat to our own rooms. And the storing of rarely used items is not a priority for us either.

We were able to settle on a comfortable floor plan that is just over 2,000 finished square feet. This includes the basement, main and upper levels. It should meet our needs now, with five growing children, and also accommodate my husband and I with main floor living, as we age. There is even potential, when all the kids are grown and moved out, to rent out the lower level for additional income.

TAKE THE VIRTUAL TOUR

I encourage you to watch the video of our cottage. It is quite a bit longer than the typical video I put out, but there is a ton of information! And, I think it gives great insight into why certain design decisions were made. I hope you enjoy!

Be sure to keep checking back for more house progress updates in the near future!

Surprise! Super last minute redesign

Funny story. Do you remember nine months ago when I made a major redesign to the main level? I was pleased with the change at the time and thought for sure I was done designing. Joke’s on me… apparently I wasn’t!

If you’ve been following along, you know that our building project has begun. We’ve cleared out trees, dealt with sewer issues, and the crew prepared the site. In fact, just this week the foundation for the house was poured! I will have an update on that over the next couple of weeks.

It’s all very exciting and welcomed progress, yet as soon as I saw the footings laid out on the site, I felt a nudge. You see, our site has some gorgeous views. It’s a gem of a property. And when I stood in the spot that would be our future living room, imagining the three large windows facing the beautiful woods, I couldn’t help but want to open up the view even more.

I looked at the 3D images that I had drawn, and thought. Was it possible?

Truth be told, I kept these thoughts to myself for a while. Surely my patient husband didn’t need the added stress of his wife redesigning a house that was currently being built. But I couldn’t shake the idea from my mind.

And then… a lightbulb moment

All along I had been holding onto the idea of our restored vintage cabinets, flanking a very formal front entry. But then I realized that this setup actually created quite a bit of rarely used square footage. Did we really want to allocate nearly a tenth of our main floor footprint to something that wouldn’t be needed on a daily basis? My simple answer was ‘no’.

main floor before

Taking the formal entryway out of the picture, the space absolutely opened up. I was able to maintain a small area by the front door for coat hooks and a small bench to be used by guests and visitors. The beautiful cabinets were then positioned to frame an opening to the kitchen.

main floor after

Speaking of the kitchen. I am SO in love with this new concept, which puts the amazing cast iron sink on center stage!

That large window will be sized to fit perfectly over our vintage sink.

Overall, the public parts of the main level are now open to one another and will be graced with ton of natural daylight. And, of course, the spectacular view is expanded.

Additional benefits of the redesign

Apart from the increased view, this redesign has a couple other benefits. With a large space opened up, there is now room for an even larger dining room table. It has always been my dream to have a table that can seat at least ten. This space will accommodate a table that size, or even bigger! As a bonus, there will be room for an additional piece of furniture near the table.

Perhaps a china hutch, or a fun and interesting vintage piece such as an old apothecary cabinet.

In the kitchen, we can include a larger fridge. I had always thought we would use a counter depth model, until we found that they were quite a bit more expensive than the deeper versions. It seems silly to pay more for something that has less space, but that is just the way it is. Counter depths are considered an ‘upgrade’. Surely our growing family will fill up a standard depth fridge with no problem!

The home is also made more handicap accessible, should any of our family members find ourselves in a wheelchair at some point. There is a natural wide pseudo hallway running the entire distance of the open room, and the kitchen includes plenty of space to turn.

What the redesign entails

All of this seems to add up to a major change, but in reality it isn’t a big deal! It shouldn’t send our contractor or the crews scrambling around too much anyway! Essentially, we will need to purchase two additional windows for the house – a large one for above the sink, and another for the living room. Our front door will change, from one with sidelights to a door only.

The exterior will also look a bit different too, with the removal of the small gable dormer above the porch and the addition of a column set.

Though I’ll admit that I do like the exterior look of the original design a bit better, the revised version is a manageable trade-off for the increased function and livability inside. And, I am giddy at the thought of two planters!

So, there you have it. Our surprise redesign. I have said for years that I work best under pressure. Apparently that includes adding design tweaks mere weeks before the house needs to be built. A few of the construction document sheets will need to be re-printed. But it will be worth it.

I would love to know your thoughts on this last minute redesign. But, hey. If you have any additional improvement ideas- please keep them to yourself. There isn’t time to go back to the drawing board again after this! Ha!

Site Clearing | House Building Update No. 1

As step one in the construction of our new, custom designed cottage, we are starting site clearing. Our building site is essentially covered with mature trees, some of which are possibly over one hundred years old.

Arrow Hill Cottage Construction | Week 1

For future construction updates, please visit this link

It feels a little surreal to be writing this post documenting the start of a construction process, after ten plus years of dreaming, planning, and calculating. And, in full disclosure, we aren’t even fully sure that everything will be going ahead just yet.

We are currently in a holding pattern, waiting on appraisal results. The bank wants to know what the value of our property, with the house we are proposing, will be worth when completed. This appraisal valuation will determine the amount of money they are willing to loan us for the construction.

Ideally, we would not have to go through the bank at all. Yet, as you are probably aware, building a brand new house is quite the investment. Knowing that we are planning to live in this house for hopefully the rest of our lives, we are willing to put more money toward it upfront.

However, as mentioned in a recent post about how to save money, we are a frugal pair. Spending this large sum of money is scary for us, and we want to be sure we are doing things in a financially wise way. Being guided by emotions alone could get us in trouble.

So, for now, we wait to hear back. In the meantime, we want to be productive and moving in a forward direction. And so, this past weekend we started clearing the site.

NATURAL FEATURES OF THE SITE

Our building site features over two and a half acres of mature trees. Mainly, species of oak, maple and aspen. The land slopes toward a 6 acre pond. It is an incredible setting, and we absolutely want to be mindful of the unique natural features during construction.

The photo above was taken many years ago, when we first purchased the property. Standing on the frozen pond and looking toward the land, one can get a clear view of the site’s beauty.

You can read about why we chose the name Arrow Hill Cottage for our property in this post. Take a virtual tour of the site by checking out this post.

SITE CLEARING FOR OUR NEW HOUSE

Though it is sad to think of having to take down any tree, removing a hundred year old tree is that much more painful. However, there is simply no way around the fact that some trees will need to be lost in order to build a house on this particular site.

I was very careful, during the design process, to minimize the house footprint. This decision will reduce the number of trees that will need to be removed.

We walked the property with our contractor and the excavator, to determine a general position for the house. They marked the trees that they felt would be within the footprint, or would be too close to the finished house. Then Craig and his dad set to work.

CUTTING TREES DURING SITE CLEARING

Thankfully, Craig’s dad has a lot of experience with cutting down large trees. Craig’s parents continue to heat their house through the winter by using a wood burning furnace. It definitely isn’t the most convenient method of heating a home, but the warmth is unsurpassed.

Instead of paying a tree removal company to come and cut down the trees, we were able to do a trade of service. By helping us remove the trees, we compensated Craig’s parents with wood that can be used to heat their house. A win for everyone involved.

A few of the very large oak trees have long, straight trunks. We hope to find someone who is able to mill these into boards. These boards would then create a very special feature piece for the finished house – a harvest dining table.

CLEARING THE SITE VIDEO

Though it was sad to cut down such large trees, it was an amazing site (and sound) to watch.

GETTING THE KIDS INVOLVED

This process is so special for our family. Our boys especially are very interested in how the house will come together. They want to be involved as much as possible, and clearing the site offered a wonderful opportunity. Our oldest and youngest son joined us this time, while our middle son helped out by watching the girls.

They got a kick out of trying to use semi-dulled axes to cut at a few of the smaller trees. Hauling away the branches and loading the logs into grandpa’s truck were a couple other things that kept them busy while the adults were doing the heavy work.

Of course, there is always time for a short hot cocoa break! Showing our children the hard work that is involved in building a house is invaluable. We hope that these memories will stay with them throughout their lives. And I will cherish these photos.

COMING UP NEXT

After a few more trees are cleared, and we are able to mark out the property lines and the setbacks, we will be able to position the house. There is still a bit of a question as to the most suitable angle for the house.

On paper, it made sense to angle the cottage so that the porch was oriented toward the road. When standing on the site, however, there is an argument to be made in favor of rotating it so that the long dimension faces the pond. This would give the best pond view out of the living room window. It would also, according to the excavator, be less expensive when it comes to positioning the walkout and the amount of retaining wall that would need to be used.

The trade off of this rotation is that the view from the kitchen sink wouldn’t be ideal. It’s likely we will end up splitting the difference between both rotations.

The positioning of the cottage is going to be pretty important. It isn’t like a wall color that can be changed in a few years!

OTHER SIMPLE HOUSES BEING BUILT

If you enjoy following people who build their dream homes, consider checking out these fun blogs!

Little House Simple Living

The Sunny Side Up Blog

PIN THIS POST

Keep this post handy, as a shortcut link to our entire building process! It should be a pretty exciting and busy summer!

Design Elements | Inspiration For Our New Cottage

Today I am excited to share with you a few of the design elements we are planning for our new cottage. Hopefully, by the end of this post you will have a good sense of what our finished interior space might look like.

OUR FOREVER HOUSE

To be honest, I haven’t given a ton of thought to the interiors of any of the houses we have lived in. I think, in part, it is because I knew we would only be living in them temporarily.

This house though, being our forever house, has caused me to think more critically. We want to be very intentional about what we surround ourselves with.

MIXING OLD WITH NEW

Though we are building a brand new home, we feel it is important to incorporate items that have seen a bit more life, and wear and tear. The reason for this is twofold. Number one, we don’t want to feel that we can never touch anything, or be worried that our kids might break something.

Number two, we feel that a new house can seem a bit bland and stark if everything is perfect and new. A mix of found items can really help to give the interiors a casual, comfortable, and lived-in and vibe.

MAIN DESIGN ELEMENTS

There are four main categories of inspiration that I will be discussing: geometry, color, texture, and specialty items. They all work together to form an overall design style that is simple and orderly while also comfortable and casual.

Geometry

As an architecture major, I am fascinated with geometry. I love how simple lines and shapes can come together to form something interesting and beautiful.

One example of how we plan to incorporate geometric design into our new cottage is the five panel doors we have chosen. They mimic the pair of wooden doors we refinished last summer. I think they have a classic look that will pair well with the simple lines of the cottage.

This window also displays basic, yet interesting geometry. I saw it out of the corner of my eye one day when I was browsing through an antique shop. Though it was priced higher than I wanted to pay, I could not get my mind off of it. Eventually came home with me, and we have loved it ever since.

Color Scheme

When it comes to color theory, I am definitely one who prefers a mostly neutral palette, with pops of interesting color. Knowing what colors to ‘pop’ with has been something I have slowly learned through the years.

In fact, the realization of the color scheme for our new house came to me a bit by accident. A few years ago I purchased this simple pillow. It kind of spoke to me, even though I couldn’t really put my finger on why. The pillow has been a mainstay in our living room since that day, and every time I look at it I smile.

It wasn’t until recently that I realized that the pillow brings a couple of my very favorite design elements to life. The geometric pattern is simple, and pleasing to the eye. But also, the colors themselves are those I tend to gravitate toward. With the exception of the tan color, which I would replace with a mustard yellow.

Without even knowing it, I have been accumulating items with these colors and bringing them into our home.

This rust-red pitcher, for example, adds just the right amount of color. And the small lithograph print features many of my favorites.

Texture

I am a huge fan of texture. More specifically, neutral texture. It is one of the reasons I am a sucker for a woven basket or a macrame wall hanging.

This pillow is one of the ways that I added a bit of texture to our home decor. I created a blog post a while back which details the steps to make one for yourself. I will be re-doing the video link in the near future. There have been people who have tried to make the project and have commented that the video could use a few more step by step instructions.

Other textured items might be really subtle. This pair of white bowls, for example, have a small bit of ribbing around their rims. I think this tiny bit of detail really adds visual interest to an otherwise ordinary piece.

Special Items

A house filled with generic, store bought items will not have the same feeling as one adorned with well loved items. Displaying items that bring you joy or remind you of someone you love is the perfect way to make a new house feel like home.

We have special items of all types that we plan to utilize at our new cottage. The cabinet in this vignette, for example, is one of a set that my husband painstakingly restored this past winter. He put so much effort into them, and they are absolutely stunning!

A cream can, saved from the run down farmstead of my great-grandparents, will become a special conversation piece in the cottage.

This crate has been used as a toy box for many years by our children. We plan to bring it with us when we move. Although it may eventually be filled with different items, it will forever hold the memories of a time when our kids were younger and enjoyed it as a toy box.

We are so excited to see all of these design elements come to live in our new home! If you would like to be the first to know about the construction timeline, be sure to subscribe to my email newsletter. I will be sending out house information there first. Also, consider subscribing to the Arrow Hill Cottage YouTube Channel. There, I plan to post a house building update once per week, as soon as we break ground.

Thanks for stopping by! I enjoy sharing this journey with all of you!

TAKE A CLOSER LOOK

In this video, I do a little walk-through of each piece in the vignette. I describe the design elements and talk about each piece and how they represent the elements.

PIN THESE IDEAS

HARVEST DINING TABLE DESIGN

I’ve got the basics of the kitchen plan figured out, and have begun the transformation of the dining chairs. Now is a good time to work on the design of the harvest dining table that our family will use at Arrow Hill Cottage.

This will be a custom piece, and hopefully an heirloom that will be passed down for generations. As such, I want to think through every detail to be sure it will stand the test of time.

OUR DINING PHILOSOPHY

Our family enjoys eating our meals together as a group. It is something we strive to maintain as a top priority, even while the kids grow and become more involved in other activities.

The space where the dining table will reside is directly to the right of the kitchen. In fact, I would consider our kitchen to be a kitchen/dining combination. The dining area is pulled off to the side a bit. This helps to maintain the kitchen work triangle as well as define the eating area as a place of importance.

HARVEST TABLE DESIGN BASICS

The harvest dining table design is heavily influenced by a few factors:

First, we are a family of seven. While we only need seven chairs around the table, we want to be sure to always have a few extras for guests. The set of 10 vintage chairs we are refinishing will surround the table, leaving 3 seats always ready for company. I specifically looked for chairs that had a smaller profile, knowing that we would have many set up at all times.

Second, The space where the table and chairs will sit is a bit narrow, and because of that I know that the table will need to be narrow as well.

Lastly, The table top will be made of solid wood boards – hopefully harvested from our property. We do not want to complicate the design by making a table that has extendable leaves. Whatever size the table is, it will be one hundred percent of the time.

Considering all of these factors, I knew from the start that I would be designing a long and narrow table.

HARVEST DINING TABLE INSPIRATION

I found inspiration in the form of a ‘dry sink’ turned table that I spotted at a local antique store last year.

It apparently had been used in a one room schoolhouse in the early 1900’s. When I spotted it, I kind of wanted to just take it home with me right then and there. Unfortunately, I couldn’t justify the price tag or the fact that it would need to sit in storage for over a year before it could be utilized.

Instead, I kept my eyes open for table legs that looked similar to those used on the dry sink. I finally found them in Kansas, on the surprise anniversary road trip Craig took me on in June.

They were just the shape I had been looking for, and I love that they will hold memories of the special trip that we had together.

After measuring the chairs and determining how much space is needed between them, I came to the conclusion that the size of the table top will be 3′-0″ wide x 8′-6″ long.

DESIGNING IN THE THIRD DIMENSION

With all of this information in mind, I set to work with my favorite 3D designing tool – Sketchup. I’ve written before why 3D modeling is important during home design process. Many of the same reasons ring true for other design endeavors as well. The third dimension is just so helpful in visualizing what the end product might look like.

In this case, it also helped me to determine what sizes and lengths of lumber might be needed to get the job done. The below image lays out the 2×4 material. This configuration will be used for the framing and stability of the table. Higher quality wood will be added to the face. If we have enough, it may even be wood harvested from our land.

table framing

The legs of the table are positioned at the very ends, allowing enough space for 5 chairs on either side.

For added support, I am anticipating that there will need to be a center brace that runs from one end of the table to the other.

I have yet to determine the finish of the legs. I go back and forth with either stained wood or painted black. We may not be able to make a full decision until we begin finishing the legs. If we can’t get the stain to blend well with the lumber from our land they may need to be painted.

I think the piece will fit beautifully in the space! It will add just the right amount of simple charm. You’d better believe I am looking forward to eating many home-cooked meals with my family in this very spot!

SATURDAY SKETCHBOOK: LOWER LEVEL

The lower level of the cottage is really starting to take shape! I think it is pretty close to what the final revision will be, and thought it might be a good time to share it with all of you.

I have to say that one of the things we have missed the most while living in our rental farmhouse is a finished basement. We used the basement in our last house as a place for the kids to be rowdy during the day, and a quiet retreat for the grownups at night. I wanted to design in those same functions for the new house – also keeping in mind that our kids will be teenagers in not too many years, and we would love it if they had friends over to our house to hang out.

The layout of the lower level is quite simple, with one very exciting bonus space

lower level plan

The lower level in 3D plan form

To the right of the stairs is a large mechanical room, which will probably have a little space within it for storage of items such as Christmas decorations.

When you first step down the stairs you enter an open family room. I have always envisioned a large, comfy sectional sofa and a couple of overstuffed chairs. On the wall – a giant tv – one of the things that Craig and the boys are most excited for. I imagine this area will be used for family movie night, as well as Playstation tournaments with friends!

Off to the other side of the room is a small space for a table and chairs. This is the table we are currently using in our dining space – and is a hand me down from Craig’s grandparents. It’s an antique piece and will serve as the perfect spot to play games as a family, or set up snacks.

After much debate, we decided to add a walkout door from the family room. This door will provide access to a future outdoor patio / fire pit area. We love that the large windows in this room will let in a lot of natural light and the visual connection to the outdoors will ensure that the space won’t feel like a basement.

From the family room, there is a small hallway space that has access to a 3/4 bathroom on one side and the den on the other. Though the room will have both an egress window and closet, so that it can be considered another legal ‘bedroom’ for the house, the den is technically going to be Craig’s space – or ‘man land’ as he calls it. He has been dreaming of a little room of his own for years! In each of the places we have lived, I have had my own office or craft room/ creative space. It’s about time that he has a chance. I imagine he will spend many hours here working on computer projects and watching sports on tv, maybe reading a book in the recliner with a cup of coffee in hand.

The couch contains a pull out queen size bed that can be used for guests when they visit.

The final space in the lower level is quite possibly going to be the most used room in the entire house. The Rec Room. A 16′ x 25′ open space for large motor activities – running, jumping, kicking, etc – it will serve as a small indoor gym. A portion of the ceiling will be 16′ high, so that we can set up a basketball hoop and shoot free throws.

This room was on the drawing board, then off, then back on again. Once we got word from our contractor that the extra space won’t be terribly expensive (because of how our site slopes and how deep the footings will need to go for other portions of the house), we figured we would not regret adding it. It will be unfinished at the beginning of the build, until we can afford to finish it the way we’d like.

The room is large enough to shoot free throws in!

A pair of windows provide some natural lighting

If you ask the kids which room they are most excited for – I think they would collectively say that the Rec Room is the most anticipated. And, Craig and I might be right there with them on that sentiment! This indoor space will allow us to stay active even in the cold winter months, and will be especially handy now that we have discontinued our local gym membership. We have been talking about getting a treadmill, some free weights, a kicking net, pull up bar, and possibly incorporating a small rock climbing area. It will also, of course, be the perfect spot to play ping pong! All sport equipment will be stored in a large walk in closet located in the back of the room – keeping the rec room as open and uncluttered as possible.

View from rec room into family room space. Closet door is to the right in this image.

Notice the ceiling height change from 8′ to 16′

As we approach the cold winter months here in the Midwest, we are bracing ourselves while at the same time thinking that we should be in our new house next year at this time. When the snow melts in the spring, we want to be ready to break ground as soon as possible! So exciting!

SATURDAY SKETCHBOOK: EVOLUTION OF OUR DESIGN

It’s interesting, now that I have been blogging for over a year, to look back and see some of the things that I have written – particularly as it relates to our house design process.

I am actually really thankful that I started documenting the process when I did. At the time, I had no idea that our floor plans would change as dramatically as they have. I believe it might be encouraging to others reading this blog, who might be considering the design of their future dream home – to see that even someone who is seasoned in design can begin in one place – and end in another.

When we first started out, before our budget was completely realized, our house plans included special features such as a large vaulted living room, a small built in elevator/lift, and an endless pool in the basement.

You can see our original floor plans and my own personal thoughts about our dream home (as we believed it to be at that time) by linking to the following blog posts:

Main Level (original plan)

Upper Level (original plan)

Lower Level (original plan)

Through time, as we began to understand the true costs of what it would take to make these dreams a reality, the restrictions became more clear – and the designs began the process of fine tuning. Essentially, we had to determine which features of the design were most important to us, and which we could live without.

I wrote about how we made the decision to eliminate the large living room, and opted for a combined kitchen & dining space – to save on square footage – in this post.

And later, I documented in this post the fact that we would need to simplify even more – reducing the amount of windows, specifically in the living room, and also rotating the garage so that there would be a shorter driveway.

These changes didn’t come easily. I’ll admit it was hard for us to see some of the features we were most excited about slip away. But here’s the thing…

It’s still our dream house

With each change, the concept of the design was maintained, yet simplified. You could say that, essentially, we ‘cut the fat’.

In fact, as each modification has occurred, Craig and I have both looked back and realized that we prefer the more simple idea over it’s more complicated counterpart.

The fine tuning hasn’t been all elimination either. We have also been able to justify fun surprises, such as the rec room/ home gym in the lower level, and the nicely laid out upstairs bathroom with a large walk in shower. Both features that we know our family will greatly enjoy!

The newer floor plans, and hopefully plans that are VERY close to what will actually be built, are as follows:

Main Level (refined design)

Upper Level (refined design)

Lower Level (refined design)

The exterior has changed quite a bit too – in response to the interior changes.

This is how the exterior design looked last summer, before we began fine tuning.

And this is how it looks now. The most notable changes include the elimination of the living room ‘wing’, the reduction to one gable over the entry door, the change in orientation of the garage, the switch from a metal roof material to asphalt, and the elimination of the transom windows. The refined exterior is more simple and balanced, I think. I especially like that the entry door is centered on the gable and framed by the columns. Also, please note that the large planter box is still there. 😉

I will be taking some time this weekend or early next week to update the slideshow images on the website itself, so that it can reflect these changes.

Hopefully this post, and the overall blog – which will eventually capture our cottage from design, through building, and into interior decorating – will be a useful reference for people who are considering a new build of their own. It isn’t necessary to have it all perfect on paper starting out. The design will evolve and allow you to love it more along the way!

SATURDAY SKETCHBOOK: GIRL’S SHARED BEDROOM

The upstairs of the cottage is very simply laid out. It will contain two bedrooms (one for the boys, and one for the girls), plus a bathroom accessed from a small hallway.

I previously introduced the boy’s shared bedroom, and the hall bathroom. Today I would like to share the details of the final upstairs space – the girl’s room.

The room is 140 square feet total, with basic overall dimensions of 10′-4″ deep x 14′-4″ wide. A small portion of the rectangular area is used by the bathroom shower – giving the girl’s bedroom a bit of an irregular shape.

Though it is not a large room, the feature that will make it seem more spacious is the tall vaulted ceilings. At the very top, the ceiling is 11′-5″ high. It will be finished in the same way that we will finish the boy’s room ceiling – with pine tongue and groove boards, painted white. I am looking forward to this simple yet elegant look.

I mentioned the amazing cast iron metal beds that I got for FREE in this post. They still need some TLC, but they will be showstoppers once they are finished! As of right now I am planning on painting them black, to balance out the amount of white used on the walls and ceiling. The bedding will be simple, with aqua and pink accents – similar to what they have in their current shared bedroom.

In fact, besides the beds, the rest of the furniture and finishing accents that I plan to add to the space will come from their current set up. The pieces work perfectly and have sentimental value.

Their dresser will sit on the short wall behind the door. It was a gift to me as a little girl, from my grandparents. It will provide two drawers for each girl and house their shirts and pants.

On the wall behind the dresser will be a small accent mirror. I imagine the girls might at some point fight over bathroom space getting ready – so this will make for a convenient ‘overflow’ spot.

In the smaller ‘nook’ space of the room will sit a glider rocker, which used to belong to Craig’s grandpa. We had it reupholstered before our oldest child was born, and used it in the nursery for each of them. It’s a very special piece.

Couple the chair with a few floating shelves filled with books, and the girls will have a perfect little spot to cozy up and read.

The birdcages above are also from the girl’s current space. Each of the paper cranes, which symbolize peace and longevity in Asian culture, were hand folded by me – during the months we waited to complete the girl’s adoptions from China.

Their closet will be accessed through two sliding barn doors, which were found in a small barn/shed on the property of the very first home that Craig and I purchased as a married couple. They are rough right now; But as part of my Summer Project Bucket List, they should be whipped into shape soon.

Inside the closet, the ceiling slopes quite dramatically, from 6′-6″ at the doors, all the way down to the floor. There is just enough head space though for each girl to have her own hanging rack (one on each side) , plus a shared cabinet with baskets to hold socks and undergarments. The extra space in the closet has a pretty low ceiling height, but will be useful for shallow bins holding rarely used items, such as Christmas decorations.

So that’s it! Now the entire second level of the cottage has been designed and drawn up in 3D! Designing with the third dimension has really been key for me throughout this entire process.

I love the way it all flows, and the simplicity of the layout. I went into the design process with the hope that it would create very little ‘wasted space’ – and I succeeded! I think all five of the kids will enjoy hanging out here.